Hytera RD985 Repeater DMR & FM UHF 50W
The digital repeater RD985 is the heart for multi-cell conventional DMR radio networks and was developed according to the ETSI standard for DMR. It offers an ergonomic design, reliability and outstanding digital functions for sophisticated communication. RD985 – Your digital advantage over your competitors!
All the repeaters from Hytera can be connected in digital mode via IP connection to a comprehensive radio network. In analog mode, the repeaters can be connected together back-to-back. Both in conventional analog and DMR modes (DMR Tier II), the RD985 repeater can be used together with the RD985S, RD625 and RD965 repeaters in a radio system.
Thanks to the TDMA technology, twice as many users can use the same channel, such as is the case with analog or digital FDMA systems. Due to the restricted frequency resources, this represents an important relief and reduces the expenses for system terminals and licenses.
To protect your radio communications against eavesdropping, the RD985 repeater possesses advanced digital encryption functions, according to the DMRA specification. Depending on the variant, the RD985 supports 40-, 128- or 256-bit encryption. With air interface encryption signaling and communications data between radio and repeaters are transmitted with reliable protection.
The repeater offers an adjustable transmitting power of up to 50 Watt and thereby satisfies the high requirements for modern PMR radio systems.
Since the repeater was designed according to military standards, it offers high reliability and excellent performance. Test results from independent laboratories have shown that the repeater can be operated for up to 100,000 hours without interference (MTBF) and it therefore meets the requirements for use in extreme situations.
The RD985 repeater can be installed in a 19-inch equipment rack with an optional installation kit. Alternatively, it can easily be operated on a rack, a bracket or a table. With the additionally available installation kit, an optional duplexer can be housed in the chassis
Whether during ongoing operation or during a maintenance task: You can easily access all the desired information via the large LCD color display.
- Analog and digital UHF Mobile
- RX and TX Frequency: UHF 400-470 MHz
- Steps: 12.5 / 20/25 kHz (analog) and 12.5 kHz (digital DMR)
- Frequency stability: ± 0.5ppm
- Power: 50W and 5W
- Connector Antenna: N female plug for the UHF antenna
- Compatible DMR Tier II
- Vocoder Type: AMBE + 2 ™
- 16 channels
- CTCSS, DCS for analog channels
- Size: 88 x 483 x 366 mm
- Weight 8,5kg
- CE and FCC Standards
- 2 years warranty
The Hytera DMR Trunking Pro logically consists of base station system, service terminal, bearer network and mobile switching office (MSO). One MSO supports up to 100 sites, 800 carriers. A single base station supports up to 16 carriers.
MSOs are connected via IP transmission equipment so as to build a large scale network.
As the core of Hytera DMR Trunking Pro , MSO comprises a wide array of subsystem to enrich the application functions, such as Network Management System (NMS), Dispatching System and Digital Voicing Recording System (DVRS).
Modularized design and multi-level fault-tolerant capability for enhanced reliability and efficiency.MSO supports geography redundancy. When one fails, the other one can take over its services immediately.Redundancy capability for key hardware components such as base station control unit, trunking main control channel and power supply unit.
Mobility management services: registration/deregistration, handover/roaming, etc.Data services: text message, GPS data polling, packet data*, status message, emergency alarm, etc.Advanced services: late entry, ambience listening, discreet listening, interrupt/override, dynamic group number assignment, voice recording, remote monitor, include call*, super group call, OTAP, Vote now,Group patching etc.Security services: ESN Check, authentication, stun/revive, kill, end-to-end encryption, etc.Voice services: individual call, group call, emergency call, broadcast call, all call, dispatcher call, PSTN call, MPT call, DMR conventional call, analog conventional call, full duplex individual call for mobile radio, etc.Providing Integrated Command Control System and Police Geographic Information System for public security.Providing API for further development, such as customized dispatcher, billing system, etc.
Hytera DMR DS-6210 Trunking Pro
The IP-based architecture enables flexible networking.
The system supports multiple transmission links (IP, E1, etc.) and network topologies.
Powerful Dispatching Capability
The Client/Server structure ensures networking and expanding capabilities.
Touch screen technology.
GPS visual dispatching system.
User-friendly operation interface and versatile functions.
The base station employs blade design, ensuring convenient maintenance, hot-plug operation and excellent heat dissipation performance.
Support triple diversity receiving, improving receiving sensitivity.
The modularized design allows system customization.
Based on off the shelf network devices, it enables the system to achieve high maturity, low cost and flexible function expanding system.
Hytera DMR Tier III Trunking DS-6211 ETSI standard digital trunked radio solution
Hytera's digital trunked radio solution (Tier III) is designed for demanding radio users to deliver business and mission critical communications. Developed in compliance with the ETSI standard, Hytera DMR trunking offers a customized system based on the individual needs of your organization. Modular and flexible, a Hytera trunking system can tackle high radio traffic, maximizing available capacity across dynamic user groups and challenging single or multi-site geographies.
If you require large communications capacity, complete control and a dedicated connection, then a Hytera DMR Tier III trunking solution could be the radio system for you.
Speak to one of our Hytera Partners today so see how DMR Trunking could benefit your operation.
Trunking systems increase channel usage efficiencies by dynamically managing their allocation. DMR provides two communication pathways in one 12.5KHz channel, combining the efficiencies of trunking technology with the advantages of DMR results in a highly efficient wide area solution.
Network management software, as well as the dispatcher and voice recorder systems, ensure DMR Trunking in a comprehensive, professional solution, providing central management of the radio system and supporting remote maintenance.
HIGH SYSTEM RELIABILITY
Hytera DMR Trunking combines optimal radio coverage with intelligent redundancy design so the availability of the overall system is ensured even if an individual component fails.
The system offers simple, incremental migration from analog radio operation or conventional DMR to digital trunked radio.
Voice services, data services, priority, late entry, call back, recording, PSTN call, ESN check, authentication, E2EE, stun, revive and kill, GPS, emergency alarm, etc.
CONNECTIVITY WITH OTHER SYSTEMS
Different gateways support the interconnection between DMR trunking and other systems, such as PSTN, analog conventional, MPT, DMR conventional, etc.
Open API allows for further development based on different customer needs, such as billing systems, email gateways, etc.
All devices are based on IP architecture to ensure flexible networking and system expansion.
Hytera RD982 Powerful DMR Repeater for small radio networks
The Hytera RD982 digital repeater is the heart of a multi-site conventional analog or digital radio network. Offering innovative design and reliability, this repeater delivers excellent coverage with up to 50 Watts power.
Dual Mode: Analog & Digital
Dual Mode Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users and ensures a smooth transition to Digital technology.
50W High Power
Maximum repeating power of 50W, and thus increasing the system coverage with lesser setup equipments.
A maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater’s front panel channel knob and via the channel steering from the repeater’s rear port.
The unique cooling design combining a built-in heat pipe and a temperature-controlled fan ensures quick heat dissipation, enabling the repeater to operate efficiently even with full power.
With the management software, you can remotely monitor and diagnose a repeater. In addition, you can either record or play back the audio freely in digital mode.
Innovative LED Design
The innovative LED and the 2.0”HD color display would deliver the repeater status clearly.
This allows third parties to develop accessory and applications via front and rear port of the repeater. This is achieved via the signal streaming and pin control through the repeater ports.
Dual Slot Digital Audio Streaming
Streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.
Continuous Wave Identification (CWID)
Analog transmission of the repeater identification in Morse code format.
Analog voice and signaling scan, allowing coverage of different
analog voice users from various groups.
Hytera RD622 Repeater DMR & FM UHF 25W
Compact design, integrates RF, power supply, and optional duplexer into one box, which makes the RD622 smaller, lighter, and easier for wall-mount installation and indoor coverage (wall-mount bracket sold seperately BRK21).
Decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels allowing coverage for different Analog voice users from various groups.
A repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.
Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.
Integrates an internal power supply that supports a battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.
Two repeaters can be interconnected to provide interoperability between UHF and VHF. A single repeater can auto switch between Analog and Digital mode, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.
The streaming of both the voice slots via the rear port accessory pins, allowing for capability expansion via future development and recording of communications via Hytera Dispatch System.
Remote IP connection to monitor, diagnose, and control the repeater thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connections to allow the radio administrator to monitor multiple radio networks.
Network connection via the IP port of the repeater to form a privateradio network to meet data and voice communication needs for wide-area coverage and dispersed locations.
DMR & Analog Auto Switching
3 in 1 Integrated Repeater: RF, Power Supply, & Optional Duplexer