© Copyright 2017 Communication Specialists Contracting, Inc.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
All other trademarks are the property of their respective owners © 2017 Motorola Solutions, Inc. All rights reserved.

Communication Specialists Contracting, Inc. serves the four states region of Texas, Arkansas, Louisiana, and Oklahoma; Including Texarkana, TX, Texarkana, AR, the ArkLaTex, Dallas Fort Worth (DFW), Houston, San Antonio, Tyler, Austin, Corpus Christi, Galveston, El Paso, Longview, Lufkin, Amarillo, Little Rock, Fayetville, Fort Smith, El Dorado, Magnolia, Mena, West Memphis, Benton, Hot Springs, Shreveport, Bossier, Nachitoches, New Orleans, Baton Rouge, Monroe, West Monroe, Tulsa, Oklahoma City, Idabel. We sell and service radio communication systems and equipment as well as repeater and trunking systems including Kenwood, Motorola, Whelen, Vertex Standard, Zetron, Hytera, Ritron, iCom, Nexedge, Bosch, Pryme, Telex, Ida, DMR, Midian Electronics, Sepura, iDas, EF Johnson, Bird, Pryme Blue, Astron, Infinet, and Cambium, We also sell and service CCTV (closed circuit television) security systems with DVR capability and remote viewing on a tablet, iPhone, iPad, Android, or tablet. We also sell and service wireless link systems and solutions. We offer full turn key system solutions, managed service and maintenance contracts.

Radio Links
Portable Radios
Mobile Radios
Repeater Systems
Icom FR5000 / FR6000 Two-Way Radio

PRODUCT DESCRIPTION

Multi-site conventional systems are possible with IDAS LINQ. Choose from the following configurations: LINQREPEAT, LINQREPEAT+, LINQVOTE, and LINQVOTE+. 

IDAS mult-site trunking capable! Add a UC-FR5000 and CF-FR5000MT card and multiple IDAS trunking sites can be interconnected to create a large roaming coverage area using IP.


Effective operations with all channels used to transmit voice or data payload, priority monitoring for emergency interrupt, and polite roaming while conversations are occurring.All the features of a digital radios, like text, GPS and group/individual calls available in multi-site trunking IDAS doubles the capacity of the current 12.5kHz channel allocation. Icom allows you to meet any narrow banding requirements today, and provides a solution to any future spectrum deficiencies.
The IC-FR5000 series can receive both analog and digital signals on a single channel. You can partially introduce the IDAS system, while using the existing analog radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace and need.
The IDAS repeater has a network interface* and can be connected to a LAN or the Internet via Ethernet cable. Communication range is vastly extended by the Internet connection and eliminates the need for expensive leased lines. When connected to a PC via a LAN or the Internet, you can remotely maintain the repeater configuration remotely from your PC. Two RF modules* can be installed in a chassis to reduce installation space, while the RF modules can be programmed and operated independently. LEDs on the front panel show both channel conditions.

 The IC-FR5000 series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups.The built-in inversion type* voice scrambler provides secure conversation as stadard. When a more secure system is required, the 32 coded non-rolling type voice scrambler UT-109R* and 1020 code rolling type UT-110R* are available as an option. In IDAS digital mode, a 15-bit encryption key provides over 32,000 scrambling codes.

FEATURES:

  • PTT priority setting (Local Mic., external PTT or repeater operation)

  • Built-in inversion type voice scrambler and optional voice scrambler UT-109R or UT-110R*

  • 5-Tone and DTMF encoder/decoder* and CW ID transmitter

  • Analog wide/narrow (12.5/25kHz) channel spacing programmable*

  • Normal and priority scan

  • Convenient key assign stickers supplied

  • Beat cancel capability

  • Low voltage alert*

  • Quick and easy programming from a PC

1/3
Icom FR5200H / FR6200H Two-Way Radio

PRODUCT DESCRIPTION

Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the FR5200H series provides a reliable 100% duty cycle operation at 50W output.


The FR5200H series is compatible with both analog FM mode and IDAS conventional and NXDN™ Type-D trunking mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and IDAS conventional modes and to transmit either mode depending on the received signal.


Multi-site conventional systems are possible with IDAS LINQ. Choose from the following configurations: LINQREPEAT, LINQREPEAT+, LINQVOTE, and LINQVOTE+. 


IDAS mult-site trunking capable! Add a UC-FR5000 and CF-FR5000MT card and multiple IDAS trunking sites can be interconnected to create a large roaming coverage area using IP.


Scalable from 1 channel to 30 channels per site, up to 16 sites
Effective operations with all channels used to transmit voice or data payload, priority monitoring for emergency interrupt, and polite roaming while conversations are occurring​

All the features of a digital radios, like text, GPS and group/individual calls available in multi-site trunking
The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.

FEATURES:

  • CW ID transmission

  • ±0.5ppm high frequency stability (Digital mode)

  • 2U low profile for 19-inch rack mount

  • Digital voice scrambler provides 15-bit key (about 32,000 codes)

  • Built-in inversion voice scrambler (Analog mode)

  • Built-in audio compander (Analog mode)

  • PTT priority setting (Local Mic., external PTT or repeater operation)

  • 5-Tone and DTMF encoder/decoder (Analog mode)

  • Normal and priority scan

  • Convenient key assign stickers supplied

  • Beat cancel capability

  • Low voltage alert (Analog mode)

Icom IC-FR9010 IC-FR9020 110W* Full Duty Cycle P25 Digital Repeater

PRODUCT DESCRIPTION

110 W 100% Duty Cycle Operation

Employing a high performance power amplifi er, together with the solid heatsink built into the chassis, the IC-FR9010 series provides a reliable 100% duty cycle operation at 110W* output.

* 110W for VHF, 100W for UHF. 

P25 Conventional, Analog FM and Mixed Mode

The IC-FR9010 series is compatible with both analog FM mode and P25 digital mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and P25 digital modes and to transmit either mode depending on the received signal.

500 Memory Channels Capacity

The 4×20-characters display, 16 key buttons, 500 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. The bar graph display shows the S-meter level and output power level.

P25 Conventional Base Mode

As a P25 conventional base mode, the following P25 functions are programmable. (Conventional base mode only)

  • Emergency

  • Call alert

  • Radio check

  • Radio inhibit (Stun)

  • Radio uninhibit (Revive)

  • Status update

  • Status request

  • SBC log (Call log)

Icom  FR5000C FR6000C NXDN™ Type-C Trunking Digital Repeater

PRODUCT DESCRIPTION

General Features
• 146–174, 400–430, 450–480MHz
• 5W output power (100% duty cycle)
• Repeater or base operation
• 1U 19-inch rack mountable
• 6 programmable function keys
• Two-digit LED display
• 30 channel scanning base (Conventional mode)
• 3W external speaker audio
• Program/modem interface
• Remote terminal interface
• DTMF AUX output control
• DTMF AUX input monitoring
• Programmable AUX I/O’s
• Flash firmware upgrading
• 16 CTCSS and DTCS built-in


Digital Features*
• Digital conventional mode
• Multi-site conventional
• NXDN™ Type-C trunking mode
• Digital/analog mixed mode operation
• 15-bit digital scrambler
• 6.25 & 12.5 kHz channels
• Unit ID & Group ID validation
• Optional OCXO unit for 6.25kHz channel spacing
• Up to 48 site trunked IP network
• IP network connectivity
• Compact flash memory expansion

 

Icom  dPMR™ Mode 3 External Controller

dPMR™ Mode 3 Digital Trunking

dPMR is a 6.25 kHz FDMA based digital radio protocol described in the ETSI technical standards TS 102 658. It offers 6.25kHz spectrum efficiency, higher security and greater audio clarity even on the fringes of the communication range. In a dPMR Mode 3 digital trunking system, when a user requests a call through a dedicated control channel, the trunking controller automatically allocates one of the traffic channels and sets up the call. The system can accommodate a large number of users on a limited number of repeater channels with high efficiency. The CS-FC5000SCS System Control Software can interconnect multiple trunking controllers over an IP network, so the system can be expanded from a single site system to multiple sites or region wide network to increase coverage.

 

  • Dedicated control channel

  • Efficient spectrum usage

  • Up to 32 channels per site
    One control channel, Up to 31 traffic channels

  • Up to 32 site multi-site trunking with CS-FC5000SCS System Control Software

  • Up to 256 Sites Multi-region Connection (8 Region × 32 Sites for example)

  • Channel License System

  • Automatic roaming from site to site

  • Subscriber registration

ICOM CY-5000 / CY-6000

PRODUCT DESCRIPTION

  • Built around the robust 19" rack mountable CY series chassis-height 3U

  • Utilizes the IDAS™ UR repeater module

  • Internal 110/220VAC power supply

  • Auto battery backup

  • Terminal screw connector for easy external battery connection

  • DB-25 connector

  • Three shielded data ports

  • Silver-plated "N" - type bulkhead RF connectors

  • Built-in grounding stud

  • Optional built-in duplexer – version specific

  • Optional built-in pre-selector – version specific

  • 80 CFM heavy duty cooling fan – draws air from the top vents across the UR module for cooling

  • Simple (CY-5000)

  • With duplexer installed

  • With pre-selector installed

  • With both duplexer and pre-selector installed

FEATURES:

  • Optional VOX headsets available

  • Power ON password

  • Radio stun/kill/revive

  • 8 DTMF autodial

  • Normal and priority scans

  • 2-step power saver and 2-step low battery beep

  • Busy, repeater lockout functions

  • Inversion type voice scrambler built-in (Inversion type voice scrambler is not compatible with UT-109/UT-110 voice scrambler. UT-109/UT-110 cannot be physically installed into the IC-F60V.)

X-Band Air Crossband Repeater – VHF or UHF + Air band

PRODUCT DESCRIPTION

Communication just got easier with Icom’s X-Band Air repeater. The X-Band Air provides seamless inter-band communications between VHF or UHF frequencies and air band frequencies. This provides interoperability between ground crew and air crew for forestestry, hospitals and oil rigs. The repeater provides full VFO capability in one box.
Output power:

50W (VHF); 45W (UHF); 36W (air band)
Frequencies:

 
136-174MHz (VHF)
400-470 or 450-512MHz (UHF)
118.00-136.992MHz (air band)
Versions:

 
Air band + VHF
Air band + UHF 400-470MHz
Air band + UHF 450-512MHz

FEATURES:

  • 19” industry standard rack

  • Automatic battery backup charging system

  • Internal controller with programmable hang timer

  • Use as a dual base unit

  • DB-25 accessory connector with EPTT, COR, DISC, EMOD and SFO for each radio

  • Built-in AC EMI filter

X-Band Air Crossband repeater